How to Replace Audi Brake Lights


1. Park the Audi on level ground.
2. Open the rear trunk of the Audi.
3. Remove the two screws located on each side of the inside of the trunk, using a Philips head screwdriver, in a counterclockwise motion, in order to slide out the rear taillights.
4. Detach the two clips found behind both taillights in order to disconnect the bulb wiring from the taillights, and then completely remove the taillights from the Audi. If the light bulbs need to be replaced, pull them out and insert new ones, from behind the taillights.
5. Repeat the steps in reverse in order to install the new taillights on the Audi.