How to Install Lip Spoiler

1. Clean the area where you want to install the spoiler with the adhesive cleaner and the cloth. Clean the lip spoiler's mating surface with the adhesive cleaner and the cloth. Ensure all wax and other reside is removed from the car and lip spoiler's mating surface.
2. Measure the lip spoiler with the measuring tape; compare the vehicle for the same measurement to determine where you want to attach the lip spoiler to the vehicle. You want the lip spoiler to be centered on the vehicle's deck lid. Mark the vehicle on the points where you want the lip spoiler to be attached with the marking pen.
3. Place the exposed sticky side of the sticky tape along the lip spoiler. Ensure the tape is centered on the lip spoiler. Remove the tape's second side covering to expose the second sticky side.
4. Place the exposed sticky tape side of the lip spoiler along the marked areas on the automobile. The lip spoiler should now be adhered to the vehicle.
5. Drill through the lip spoiler's holes into the vehicle with the drill. Ensure the drilled holes are sufficient for you to insert the appropriate screws and bolts into the lip spoiler and the vehicle. These screws and bolts will ensure the lip spoiler stays adhered to the vehicle.
6. Insert the screws into the lip spoiler and vehicle holes you made with the drill in Step 5. Insert two screws on each side each wheel well at the top of each of the lip spoiler's sides.