How Do I Install a 2001 Audi A4 Flasher Relay?

1. Locate the plastic flasher housing located on your Audi A4's dashboard. The housing slips into place there and is held in place by two black plastic clips on either side.
2. Insert two flathead screwdrivers flatly against each clip on either side of the housing and depress them slightly inwards.
3. Pull flasher housing straight up and out while depressing the two plastic tabs.
4. Unplug the flasher relay from the housing by gently pulling it apart by hand.
5. Plug the flasher relay into the housing and then slip the housing back into place.