How to Use Marvel Mystery Oil in a Mercedes Benz

1. Lift the front end of your Mercedes off of the ground with the factory jack. Place jack stands behind each of the front wheels and lower the car until it rests firmly on these stands.
2. Place a recycling pan below the engine's oil compartment. Remove the oil filler cap from the oil compartment, located on the top-side of your engine. Most oil filler caps are located on the engine cover or engine block. Crawl underneath the engine and find the oil drainage plug. Twist out this drainage plug and let all of the engine oil drain into the recycling pan.
3. Slide the recycling pan until it is beneath the old oil filter, as this part needs to be removed next. Unscrew the oil filter with the necessary wrench until it removes completely. If your vehicle has a protective oil filter cap, pull the old filter away from the cap. Attach the new oil filter to the cap, if necessary. Otherwise, install the new filter directly as the old one was removed, turning clockwise with your hand until tight.
4. Lift your vehicle off of the jack stands with the provided jack. Pull each of the jack stands out from under the frame and lower the vehicle to the ground once again.
5. Use the funnel and pour new motor oil into your engine's oil compartment, through the hole where the oil filler was originally removed. Check the manual for oil specifics, and fill the oil compartment 3/4 full. Pour the Marvel Mystery Oil into the oil compartment to fill the oil compartment and blend the two liquids. Replace the oil filler cap when you are finished.
6. Remove the fuel filler cap.
7. Begin filling your car up with the recommended fuel type needed for functioning. Add four ounces of Marvel Mystery Oil for every 10 gallons that you put into your vehicle.
8. Replace the fuel filler cap and close the door once you are finished.