How to Program My Audi S4 Home Remote


1. Press and hold the two outer HomeLink buttons. Release them when the indicator light flashes. Skip this step if you are merely programming additional buttons on the remote.
2. Press one of the three buttons on the remote to train. When the indicator light slowly flashes, release the button. You have five minutes to program the remote. If five minutes expires, start the process again from Step 1.
3. Stand in front of the car and hold the remote three to five inches from the bottom of the right headlight.
4. Press and hold the button. Wait for your hazard lights to blink three times. If the lights only blink once, you should start the process again because you exceeded the five-minute maximum.
5. Press and hold the trained button. If the light is solid and sustained, you have successfully training that button. If the light blinks for two seconds and then turns solid, follow the subsequent steps.
6. Locate the garage door opener. Locate the 'Learn' or 'Smart' button.
7. Press and release the 'Learn' or 'Smart' button. Within 30 seconds, firmly press and hold the same button for two seconds, and release. Repeat this step up to three times to program the other buttons.