How to Change Brakes on a BMW


1. Loosen the lug nuts on both front wheels by turning them 1/4 turn counterclockwise.
2. Raise the BMW up using the floor jack. Jack under the front jack point.
3. Place jack stands underneath the pinch welds of the BMW and lower the vehicle onto the jack stands.
4. Finish loosening the lug nuts and take the wheel off.
5. Unbolt the top and bottom brake caliper mounting bolts on the BMW and secure the caliper to the coil spring above the brake assembly with the zip ties.
6. Remove the brake pads by taping them out with a rubber mallet.
7. Place the face of the brake pad over the caliper piston and then place the c-clamp over the back of the brake pad and caliper assembly. Gently force the caliper piston back into the caliper by tightening the c-clamp.
8. Insert the new pads and reassemble the brake system. Installation is the reverse of removal.
9. Repeat steps 4 - 8 with the other front wheel.
10. Put the wheels back on, tighten the lug nuts and lower the vehicle. Torque the lug nuts to 100 foot-lbs once the wheel is back on the ground.
11. Raise the rear of the BMW using the rear jack point and place the jack stands under the pinch welds in the rear of the vehicle.
12. Lower the vehicle onto the jack stands and then repeat steps 4 - 8 for the rear wheels.
13. Put the wheels back on, tighten the lug nuts, and lower the rear of the vehicle. Then, tighten the lug nuts to 100 foot-lbs.