Mirror Installation for a 1997 Audi A6 Quattro


1. Open the door and roll down the window on the Quattro. This allows you to hold the mirror when it is time to remove the nuts from the inside of the door.
2. Remove the triangular access cover from the inside door panel by pulling on the cover with your hands. The cover mounts to the inner door directly across from the location where the mirror is on the door.
3. Disconnect the mirror motor from the electrical connector located behind the access cover.
4. Hold the mirror with one hand and remove the three nuts with a socket with the other hand.
5. Pull the old mirror out of the door and place the studs on the end of the new mirror into the door. Secure the mirror with the nuts.
6. Reconnect the wiring harness and tuck it back into the door's sub frame.
7. Place the triangular access cover back onto the door and snap it into place.