How to Replace BMW Fuel Injectors

Disassembly
1. Disconnect the ground cable from the negative battery terminal.
2. Disassemble the injector pipe by removing the plugs, plate and screws.
3. Gently push up on the injector pipe until all of the injectors have cleared the intake manifold.
4. Remove the plugs and pull up the retainer. You should now be able to remove the injectors.
5. Inspect the injector O-rings. If they are torn, worn or misshapen, replace them.
Reassembly
6. Install the O-rings onto the new fuel injectors, then seat them into the injector pipe.
7. Reinstall the fuel injector retainer and plugs.
8. Slide the injector pipe back into position. Be careful not to damage the injectors.
9. Reassemble the injector pipe.
10. Reconnect the ground cable to the negative battery terminal. Run the engine and make sure there are no leaks.