How to Make My Mustang Look Like a Mercedes


1. Park the Ford Mustang with ample room to the sides for the wheel removal. Jack up the car and then slide in jack stands to support all four corners. Use your tire iron to remove the wheels.
2. Thread in the bolts into the wheel adaptor and then into the hub assembly. Then wrench the bolts down flush with a wrench. Lift the Mercedes-Benz wheel up and bolt into place on the adaptor. Repeat this process on all four wheels. Lower the Mustang off the jack stands and check for any rubbing between the tires and the wheel well sides.
3. Pry off all the Mustang badges with a flathead screwdriver. This exposes the mounting hole underneath. Measure the peg on the Mercedes badge and the mounting hole. If the hole is too small then widen it with a power drill. Apply epoxy resin to the underside of the badge and press into place. Hold the badge for a few seconds so the epoxy adheres to the skin.
4. Pop open the hood on the Mustang and unscrew the Mustang horse from the center of the grill. Place the Mercedes grill emblem in the center of the grill and screw into place. Shut the hood and take the Mustang for a test drive to make sure nothing falls off. If it does, then use more epoxy resin.