How to Install Clear Corners for BMW 330Ci


1. Research and purchase a clear corner turn signal kit that is compatible with your BMW 330CI. Note that different models require different size corner lenses.
2. Open your hood. Locate the oval opening behind the corner turn lens in the front right or left corner of your engine compartment, depending upon which turn signal you start working on.
3. Shine your flashlight inside the oval hole behind the corner turn lens to locate the plastic clip. This plastic clip holds the corner turn lens in place.
4. Place your flat-head screwdriver into the oval hole behind the turn lens. Push down and forward at the same time with your flat-head screwdriver to jar the turn signal lens out of the car.
5. Grab the edges of the lens with your free hand to pull it out half-way. Remove the screwdriver from the oval hole. Pull the lens out fully, using both hands.
6. Find the light bulb socket in the back of the corner lens. Squeeze the release tabs on the plastic connector that connects the bulb socket to the wire to disconnect the bulb socket. Place your old corner lens aside.
7. Get your new clear corner lens in hand. Snap the bulb socket connector piece into the back of your new lens to connect it. Line up your new clear corner lens into the slot where your old lens used to be. Slide the new clear corner in until you hear a click.
8. Repeat Steps 1-7 to remove and install a clear corner lens on other side of your vehicle so that both front lenses match.