How to Change the Oil on a Mercedes C240


1. Drive the car up onto the car ramps. Apply the parking brake.
2. Open the hood. Locate the oil filter on the driver's side of the engine compartment, and unscrew it by hand. Dispose of the oil filter and its gaskets at an oil collection facility, such as an auto parts store. Lay a rag over the hole where the oil filter was to prevent debris from getting into the system.
3. Remove the 12 8mm bolts from the under-car cover using the socket wrench. The under-car cover is the plastic guard that covers the entire bottom of the car to protect the moving parts from dirt, water and grime.
4. Place an oil collection pan under the oil drain plug, which is a 13mm bolt near the center of the underside of the car that faces the rear of the vehicle. Remove the oil drain plug with the socket wrench to allow oil to drain out. Let the oil drain for 10 to 15 minutes.
5. Assemble the new oil filter with its gaskets by following the directions that came with the filter. Add a few drops of new oil to make it easier to work the gaskets onto the filter.
6. Replace the oil drain bolt once the oil has drained. Tighten the bolt by hand. Wipe off the bolt and the underside of the car. Tighten the bolt with the torque wrench to 20 foot-pounds.
7. Remove the rag covering the hole on the top of the engine. Pour in 8 1/2 quarts of oil. Screw the new oil filter on securely by hand.