How to Remove the Top on a Mercedes 560SI


1. Lay a blanket down in the area where the hardtop will be stored. Put the other blanket nearby.
2. Open both doors on the 560SL. Find the latches in each of the four corners of the hardtop where it meets the body of the car. The latches are set into the top of the sides of the body and are flush to the surface when in the closed position. They look similar to hard, plastic, rounded rectangular plugs.
3. Open all four hardtop latches by fitting the tip of an index finger in the groove molded into the end of each latch and pulling up to release.
4. Pull up the seat back-release lever on the driver's seat, and push the seat back down toward the steering wheel.
5. Reach behind the driver's seat, and turn the crank handle of the rear latch counterclockwise until the latch releases. The rear of the hardtop will pop up away from the car body slightly when the rear latch releases.
6. Stand on one side of the vehicle, and have a helper stand on the other side. Lift the hardtop up off the body of the car. Walk toward the rear of the Mercedes together, carrying the hardtop. Once the hardtop is no longer over the car, carry it together to where the blanket is laid down and place it on the blanket.
7. Place the additional blanket over the hardtop to protect it while in storage.