How to Change Xenon Lights

1. Disconnect the negative cable from the battery terminal. To do this, use a socket wrench to turn the retaining nut on the cable clamp counterclockwise until the clamp loosens enough for you to slide the cable off the terminal.
2. Open the hood and locate the high intensity discharge box for each light. There will be one located behind each light bulb.
3. Remove the top cover on the box. To do this, push in on the clip on the side of the cover and pull the cover off.
4. Rotate the bulb ignitor counterclockwise (about one-quarter turn) and remove the electrical connector by pulling straight up on it.
5. Remove the ignitor by pulling back on the ignitor (towards the firewall). When it comes loose, you can pull it up and out of the way.
6. Rotate the bulb retaining ring counterclockwise. Then, pull the bulb towards the firewall (after you've rotated the retaining ring to unlock the bulb from the housing) and negotiate the bulb out of the housing.
7. Install the new bulb. Installation is the reverse of removal.